Skip to product information
MJM All Terrain Beach Wheelchair
Product Code: 722-ATC
$1,389.00
Description
MJM All Terrain Beach Wheelchair
MJM All Terrain Beach Wheelchair is designed to provide easy access to difficult soft terrains like sand and soil. It features two swivel and two rigid heavy-duty high-flotation wheels with non-corrosive plastic bearings for easier maneuverability, to be used by individuals with lower extremity or mobility disabilities or spinal cord injury.
MJM All Terrain Beach Wheelchair Features
- MJM All Terrain Beach Wheelchair has anti-Bacterial mildew resistant mesh sling seat
- The frame is constructed from PVC and antibacterial plastic and is rust proof, water friendly, and lightweight
- Reinforced at all stress related areas
- High flotation heavy duty wheel
- Non-corrosive plastic bearing
- 2 swivel and 2 rigid wheels
- Single motion brake system
Technical Specs
MJM Beach Wheelchair Specifications
| Particulars | 722-ATC-YEL | 722-ATC-ELR-YEL | 722-ATC-ELR-YEL-U |
| Internal Width | 20.25" | 20" | 20" |
| External Width | 24" | 24" | 24" |
| External Width (Outside Wheels) | 31.75" | 31.5" | 31.5" |
| Height Push Bar Level: | 38.5" | 38.5" | 38.5" |
| Floor to Top of Cushion/Seat | 25" | 21.75" | 21.75" |
| Floor to Top of Folding Footrest | 10.25" | - | - |
| Top of Folding Footrest To Top of Cushion | 15.75" | - | - |
| Seat Depth | 20" | 20" | 20" |
| Armrests | - | Dual swing Away Armrests | Dual swing Away Armrests |
| Leg Rest Length | - | 16" | 16" |
| Capacity | 250 Lbs. | 250 Lbs. | 250 Lbs. |
| Umbrella | Included (May Vary In Color) | - | Included (May Vary In Color) |
Wheelchair Measuring Guide
Wheelchair Measuring Guide
Wheelchair Measurements:
- Hip Width:
Use this to figure seat width if it is the widest point. - Widest Point:
Measure the widest area across the lower extremities if different from the hip width. This may influence seat width or arm style. - Chest Width:
Measure the widest point of the thorax just below the armpit. This measurement may influence system width or back width. - Heel to Knee:
Use this for legrest extensions and seat height. - SRP to Knee (Seat Reference Point to Knee):
This will determine the seat depth. - Elbow to SRP (Elbow to Seat Reference Point):
Measure this width with the arm in a 90-degree angle at the elbow and the shoulder in a neutral position. - Shoulder Height:
This will determine the height and the style of the back panel or the start for a custom back. - Head Height:
This will help determine the proper headrest height.