Skip to product information
EV Rider MiniRider Lite 4 Wheel Travel Scooter

EV Rider MiniRider Lite 4 Wheel Travel Scooter

  • Runs up to 15 miles/ 24 km on a single charge
  • Solid flat free tires
  • Includes 22ah batteries

Product Code: EVMINI

$1,155.00
Image 1
Image 2
Description

EV Rider MiniRider Lite 4 Wheel Travel Scooter

The MiniRider Lite is a transportable scooter with the stability of a 4-wheel scooter and the turning radius of a 3-wheeler, providing the customer greater maneuverability. With a 280 lb load capacity and 4 wheels, the MiniRider Lite can transport higher-weighted individuals with stability not usually found in portable scooters.

The folding mobility seat has comfortable cushions and armrests that flip up and/or can be adjusted laterally.

EV Rider MiniRider 4-Wheel Travel Scooter
  • Adjustable 360-degrees deluxe seat with armrests
  • Portable and disassemble 4 wheel handicap scooter
  • Load capacity 275 lbs / 125 kg
  • Equipped with 400 watt motor
  • Runs up to 15 miles/ 24 km on a single charge
  • Solid flat free tires
  • Includes 22ah batteries
  • Takes 6-8 hours to charge completely
  • Anti tip wheels
  • Dimensions of the seat: 18"W x 15.5"D x 13.5"H
  • Ideal for disabled, handicapped adults and elderly

EV Rider MiniRider Lite 4 Wheel Travel Scooter
Technical Specs

Specifications

Overall Length - 36"

Overall Width- 24"

Overall Height (at maximum tiller height) - 37.½"

Overall Height (at minimum tiller height) - 31"

Legroom (floorboard length x width) - 19" x 13"

Deck Height (Floorboard to Floor) - 6.5"

Wheelbase for Lifts - 27.3"

Ground Clearance - 2.4"

Turning Radius - 32.3"

Folded overall length - 31"

Folded overall width - 19"

Folded overall height - 18"

Weight with Std. 12V12Ah Batteries - 70 lb.

Weight with Opt. 112V11.5Ah Li Ion Batteries - 60 lb.

Weight without Batteries - 53 lb.

Seat type - Folding backrest, ABS plastic with high desity foam cushion

Seat - Width & Depth & Height - 16" x 13½" x 13½"

Seat - Cushion Thickness - 1"

Seat Height - Cushion to Deck - 14"

Seat Height - Cushion to Floor - 20.5"

Tire Type - Solid rubber front and rear

Rim Type Rear - Cast Aluminum

Rim Type Front - ABS plastic

OEM Spec Rear - 200 x 50

Outside Diameter Rear - 8"

Tire Width Rear - 2"

OEM Spec Front - 180/40

Outside Diameter Front - 7"

Tire Width Front - 1.6"

Battery Type & Power - Std. Two 12V12Ah SLA - Optional 24V11.5Ah Li Ion Battery Pack

Brake System - Electromagnetic Brake

Climbing Angle (Maximum Recommended) - 6 degrees

Charger Type

2 Amp, 110/240 Volt SLA Charger - 2.5Amp,110/240 Volt,Li-ION Charger

Charging Time - 4 - 6 hours

*Driving Range - 10 - 15 miles

Controller - S-Druive 45 Amp

*Speed - Maximum - 4 mph

Colors - Metallic Paradise Blue with Metallic Silver Accents

Tiller Type - Height Adjustable

Throttle Control Type -Digital wig-wag

Anti-Tipper Wheels-Rear - Standard

Wheelchair Measuring Guide

Wheelchair Measuring Guide

Wheelchair Measuring Guide Wheelchair Measuring Guide

Wheelchair Measurements:

  1. Hip Width:
    Use this to figure seat width if it is the widest point.
  2. Widest Point:
    Measure the widest area across the lower extremities if different from the hip width. This may influence seat width or arm style.
  3. Chest Width:
    Measure the widest point of the thorax just below the armpit. This measurement may influence system width or back width.
  4. Heel to Knee:
    Use this for legrest extensions and seat height.
  5. SRP to Knee (Seat Reference Point to Knee):
    This will determine the seat depth.
  6. Elbow to SRP (Elbow to Seat Reference Point):
    Measure this width with the arm in a 90-degree angle at the elbow and the shoulder in a neutral position.
  7. Shoulder Height:
    This will determine the height and the style of the back panel or the start for a custom back.
  8. Head Height:
    This will help determine the proper headrest height.


You may also like