Description
Showerbuddy Roll-in Buddy Lite
The Roll-in Buddy Lite is a lightweight roll-in shower and commode chair that was designed for patient comfort and caregiver convenience.The Roll-in Buddy Lite by Shower Buddy is a durable and affordable multi-function chair. This roll-in shower and commode chair features the most popular features of the original line of Shower Buddy products at just a fraction of the cost! The Roll-in Buddy Lite's corrosion resistant aluminum frame allows for a total weight of only 35 pounds, and comes in a variety of configurations to meet various needs.
This roll-in shower chair is height adjustable and has a weight capacity of 300 pounds to accommodate a broad range of users. Four 4" locking castor wheels allow caregivers to maneuver the chair with ease on the way to the shower and provide extra stability while bathing. The interchangeable lap belt, calf straps, and chest belt provide additional support.
The Roll-in Buddy Lite comes standard with an over the toilet seat cushion with an open front and a removable commode. Various seat cushion configurations are available, including a full seat, a closed front seat, and over the toilet seats with open sides on the left or right. Fold-away footrests can be adjusted in length or removed for an easier exit from the chair. Caregivers can also remove or adjust the flip-up armrests for added comfort and support.
Are you ready? Just contact one of our mobility advisers at 866-218-0902 about the ShowerBuddy Roll-in Lite
Features
- Removable, lockable & flip-back armrests
- Height adjustable
- Corrosion resistant Aluminum frame (Grade 6061 T6)
- Stainless steel parts and hardware (Grade 304)
- Interchangeable Lap/Chest Belt & Calf Strap
- Commode System with Deflector Splash Guard
- Soft Blow-Mould Cushion
Technical Specs
| SB6C-18 | SB6C-22 | SB6C-26 | |
| Weight Capacity: | 300 lbs | 375 lbs | 425 lbs |
| Length w/ Footrests: | 35.4" | 35.4" | 35.8" |
| Length w/o Footrests: | 27.5" | 27.5" | 27.5" |
| Armrest Width (outside) | 21.8" | 25.8" | 25.9" |
| Armrest Width (inside) | 18.1" | 22" | 29.3" |
| Width Between Rear Legs: | 16" | 18.9" | 21.7" |
| Backrest Width: | 17.3" | 21.2" | 25.5" |
| Backrest Height: | 13.7" | 13.7" | 19.4" |
| Toilet Height Clearance: | 18.9" | 18.9" | 18.9" |
| Seat Width: | 18" (W) x 16.9" (D) | 21.9" (W) x 16.9" (D) | 25.5" (W) x 16.9" (D) |
| Seat Height from Floor: | 19.5" - 22.6" | 19.6" - 22.6" | 20" - 23" |
| Seat Cushion Opening: | 7" x 13" | 7" x 13" | 7" x 13" |
| Seat Cushion to Footrest: | 16.2" - 20.1" | 16.1" - 20.1" | 16.1" - 20.1" |
Wheelchair Measuring Guide
Wheelchair Measuring Guide
Wheelchair Measurements:
- Hip Width:
Use this to figure seat width if it is the widest point. - Widest Point:
Measure the widest area across the lower extremities if different from the hip width. This may influence seat width or arm style. - Chest Width:
Measure the widest point of the thorax just below the armpit. This measurement may influence system width or back width. - Heel to Knee:
Use this for legrest extensions and seat height. - SRP to Knee (Seat Reference Point to Knee):
This will determine the seat depth. - Elbow to SRP (Elbow to Seat Reference Point):
Measure this width with the arm in a 90-degree angle at the elbow and the shoulder in a neutral position. - Shoulder Height:
This will determine the height and the style of the back panel or the start for a custom back. - Head Height:
This will help determine the proper headrest height.
