De-Bug Beach Wheelchair - Stainless Steel All Terrain Wheelchair
Product Code: DeBug
De-Bug Beach Wheelchair - Stainless Steel All Terrain Wheelchair
De-Bug Beach Stainless Steel All Terrain Wheelchair has a frame constructed from stainless steel tubing for unparalleled corrosion resistance with large Wheeleez front tyres and smaller castering rear wheels. It is an articulating rear suspension system with standard wheelchair brakes of stainless steel hardware. Also features lap seat belt and swing away removable armrests.
De-Bug's articulating rear suspension allows all four wheels to remain in contact with the ground when going across uneven terrain, making De-Bug more stable than fixed wheeled chairs. This helps to improve ride stability and makes going anywhere more comfortable.
The De-Bug's unique, patented design provides a comfortable ride. Your body is properly supported in this chair. De-Bug turns easily and quickly while users sit at a comfortable tilt angle which may be adjusted. Our De-Bug chairs may be scaled to fit any sized individual and most every type of seating requirement may be accommodated.
Are you ready to enjoy the ride? Just contact one of our mobility advisers at 866-218-0902 about the De-Bug Beach Wheelchair- Stainless Steel All Terrain Wheelchair and be on your way.
Features:
- Ultimate Stability - Feel safe & secure
- De-Bug frame is constructed using #316L Stainless Steel tubing which is a higher grade than standard "#304 marine grade" stainless.
- Attractive combination of Polished Stainless tubing and Navy seating.
- Weight capacity 350 pounds standard, weight capacities up to 600 pounds can be accommodated for a nominal fee.
- Casters - rear wheels rotate 360 degrees . Wheel hubs are made from poly-nylon material to eliminate salt water corrosion.
- The rear suspension also articulates +/- ~20 degrees, allowing all four wheels to remain in contact with the ground when going across uneven terrain, making it much more stable than standard outdoor wheelchairs.
- Swing away arm rests are also easily removable for Lateral transfers.
- Footrest-Has Linear position telescopic length adjustment and four position angle adjustment. The De-Bug also has a footrest for proper foot support.
- Wheel Lock - Adjustable tension wheel brake can be actuated independantly on each side, uses all #316L stainless steel hardware.
- Chair width is ~33.5 inches to access a 36 inch doorway and is ~27 inches wide with the optional interchangeable pool wheels.
- Chair design is patented in the U.S. #380,991 and registered with agencies, and insurance companies.
- Maximum Weight Capacity: 350 lbs.
- Product Weight: 40 lbs.
- Product Width: 33.5"
- Chair Height (from seat to floor): 22"
- Wheel Dimensions: 13"D x 6"W
- Wheel Suspensions (rear): +/- 20 degrees
- Wheel Materials: poly-nylon
- Frame: #316L stainless steel tubing
- Color: Gloss SS
Wheelchair Measuring Guide
Wheelchair Measurements:
- Hip Width:
Use this to figure seat width if it is the widest point. - Widest Point:
Measure the widest area across the lower extremities if different from the hip width. This may influence seat width or arm style. - Chest Width:
Measure the widest point of the thorax just below the armpit. This measurement may influence system width or back width. - Heel to Knee:
Use this for legrest extensions and seat height. - SRP to Knee (Seat Reference Point to Knee):
This will determine the seat depth. - Elbow to SRP (Elbow to Seat Reference Point):
Measure this width with the arm in a 90-degree angle at the elbow and the shoulder in a neutral position. - Shoulder Height:
This will determine the height and the style of the back panel or the start for a custom back. - Head Height:
This will help determine the proper headrest height.
